top of page
Big Bobber Render4.jpg
logo bigbobber.png

BIG BOBBER

Fully 3D printable scale RC airplane developed by René Marschall

  • Wingspan: 1370 mm (54 inches)

  • Flight weight: 1400 g

  • Wingload: 43g/dm2

  • 6-channel: (gas, aileron, elevator, rudder, flap)

  • Can be equipped with tow coupling

  • Material: PLA approx. 900 g/TPU approx. 50 g

  • Motorization: 3S or 4S

    Printer space of 200x200x200 mm (cube) needed!

     NOTE  Slicing only works with CURA! look here why…

bobberlogo.jpg

The Savage Bobber went into production between 1997and 1998 in Italy. The idea was to develop an aircraft with good handling and STOL properties, in the classic, proven design and traditional construction, which is economical and easy to build but also to repair.

1 Kopie.png

The Planeprint Big Bobber is a completely new development and has technically nothing in common with our little bobber. We have tried to match details and dimensions pretty much to the original aircraft as far as it is possible with the 3d print technique. The flight characteristics are excellent due to the low wing load of 43 g/dm2.

​

Basically, we recommend the Big Bobber to experienced pilots, with practice in takeoff and landing. It is very easy to fly, but 3d-printed models want to be landed gently.

_DS_4521small.jpg
P2201_SML_Adesivo_Zlin18x18-1.jpg

Courtesy of 

INNOVATIVE FEATURES OF OUR BIG BOBBER

Download our free PRINTING & ASSEMBLING MANUAL, here you can see exactly what to expect before you decide to buy the STL data.

manual-bigbobber-bild.jpg

PDF MANUAL V2.0 free for download

We are constantly improving the manuals. Check if you have the latest version.

bottom of page